Wheel of Fortune
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
it's like a dice but way more fun
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 35
- Makes
- 0
- Views
- 160
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Board Games
- License
- Creative Commons — Attribution
things to print:
the nut
the screw
the stand
a wheel you like (more comming soon)
and a bearing size 6000(i didn't make one my self)
i used this one: https://www.printables.com/model/561588-bearings-print-in-place-with-real-rolling-elements they came out great and they role great. you can also use a other model if you like.
the things you can't print:
a piece of tape
print setting i used:
i used for every thing:
layer height: 0.2 mm
perimeters: 2
infill: cubic 15%
support: none
brim: none
except for the wheel i used
perimeters: 3
for strength for the pins
assembly:
- Put the bearing in the wheel.
- Then insert the screw from the outside of the stand so the flat side.
- Put the wheel with the bearing in the screw.
- Tighten the nut on the screw.
- And put a little piece of tape on the pin of the stand. not to much so the numbers can't touch the tape.
I learned a lot from making this. Hope you like it
Feedback would be appreciated, cause I am still a beginner.