1 / 3
Additional components and jigs for Pringle's Can Rockets
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A through-the-wall-fin jig and an adapter shim for 3" (75mm) Estes nose cones
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 15
- Makes
- 0
- Views
- 183
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Engineering
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Additional parts and tools for making your own Pringle's can rockets.
One is a guide for making slots for through the wall fins (which you'd make from balsa, plywood, plastic, etc.)
Another is a shim to adapt an Estes or Apogee nosecone.
I recommend printing both using tree, rather than grid supports.