LA1010 Case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
I use the LA1010 logic analyzer for my circuits often. The only problem is the case is a little bulky and I wanted to slim the form factor down as much as possible. I have a breadboard frame that I mount the analyzer onto for consolidated prototype setup. This case is the smallest form factor I could create. I used semitransparent PETG for the top so I can see the indicator light on the analyzer board. The production case has a hole over the led. Although the indicator is not super critical since the software works well to give you a status.
You will also need 4 x 2.5 x 14 mm hex screws and 4 x M2.5 x 4 x 4 threaded brass heat inserts.