Razor stand for brush and "modern" razor
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A razor stand fitting to "modern" razors like Gillette Fusion 5 or similar.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 49
- Makes
- 0
- Views
- 259
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bathroom
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Stand for a shaver / razor with place for shaving brush and a modern shaver like Gillette Fusion 5 or similar. (See photos)
Can be printed in PLA or similar.
Diameter for the brush fixture is set to 37mm.
Instructions:
Material: PLA or similar
Nozzle size: 0.4 or 0.6mm
Layer height: I have used variable layer height between 0.08mm and 0.3mm. 0.1 or 0.2 would also be fine.
Infill: 10% will do.
Support: Depending on your printers capability to print overhang. Might be required. My example is printed without support at all.
Orientation: Like shown on photo from slicer.