Counting matching models…
Modelo simple para colgar la maquinilla de afeitar en el baño, con adhesivo de doble cara. Aconsejo limpiar bien tanto la pieza como la superficie con alcohol isopropilico para que el adhesivo funcione y no tocar la pieza con las manos…
Simple Razor Stand for Gillette Fusion Razor. This is remix from Thingiverse model: https://www.thingiverse.com/thing:4654647 No support needed. Material recomended: PET-G ( PLA, ABS, ASA) Min. layer hight: 0,15
Gillette Fusion Razor Travel Case with Blade Cartridge Storage This compact and practical case is designed to protect your Gillette Fusion razor during travel or everyday use. It closes securely to prevent accidental opening while…
Holder design for a Mach3 razor and the expansion tray of extra razors. I printed this from another site download but the site has since gone down so I can't link the credit for the design.
This is a wall mount Gillet razor holder. Hold steady and make no contact with razor head. Water drain easily. Can stick with 2 side 3m tape in shower or wall. Edit : add single (centered), double triple and quad holder. Print Settings…
Simple, snap on travel cover for a Gillette Fusion razor. Print instructions Category: Household Print Settings Rafts: No Supports: No Resolution: 0.2mm Infill: 15% Filament: Prusa PETG Notes: I'd recommend PETG, since the cover needs to…
Simple travel blade cover for a Gillette Fusion 5 Proglide Razor, might fit some others The fit is quite firm as is, no other retention method needed as the head has rubberized sides No need for support material, print as is with the…
I couldn't find a decent cover for a Gillette Mach 3 razor. All of them slid on and in a gym bag would slide right back off again. This one snaps on from both sides and stays on nicely without extra rubber bands/tape/or any other such…
Holder design for a Gillette Fusion5 razor and the cartridge refill case
My black print in PLA is strong but was a bit rough testing it; perhaps with no raft this would be the go-to. Yellow images represent an ABS print that was brushed with acetone to smooth it out. Clear is PETG with lots of brim no raft.…
A travel razor guard for the Gillette Venus Comfortglide cartridge razor.
printed in PETG, 0.2mm, 15% infill, with support
I always really need my razor and it's very annoying to put it in the original box every time I have to go somewhere. The original box it's made out of cardboard and it's not strong at all, so I came up with this model for when you need…
Enjoy... Print Settings Rafts: No Supports: No Resolution: 200 Infill: 5 Notes: no support or raft needed Category: Household
This is a very simple and easy to print travel box Gillette Fusion5 razor. The outside dimensions are 147mm x 47mm. The gap between the top and bottom part is 0.05mm. It works well on my printer setup. If needed you can slightly scale the…
Quick print that solves the problem of razorblade and protectionpads wearing out prematurly. Snaps on to the shower pipe. Mount it high up to keep it out of the water.
This design is based on Jimbo70's Mach3 Razor Travel Case with a few improvements. Changes include: - tighter tolerances (original was 1mm) → snap mechanism works better now - redesigned text (file without text available too) - rounded…
Sleek Razor Holder Elegantly holds your favorite razor in a variety of settings Features Stand your razor to free up space in your medicine cabinet, sink, or shower. Wide 25mm (.98") opening accommodates most size handles. Gillette,…
We have two versions for you here. One is the bracket without holes, here you simply use double-sided adhesive tape to attach the bracket to your cupboard. However, if you want to be on the safe side, you can download the file with drill…
Gillette Mach 3 handle. Remixed the original to cut down on print time / material. Original File by KikiTay on Thingiverse No supports needed. Layer Height : 0.2mm Material : ANY
Wandhalterung für Gillette Fusion 5 Rasierer
This is a (travel) case designed for the Gillette Mach3 razor. It has included vents allowing the razor to dry. I printed it in matte black PETG to withstand higher temperatures and to provide some impact resistance through flexibility.…
This remix supports Gillette Mach3 razors
After traveling with my razor loose in my backpack I decided it was time to create a safety guard ;) Printed in pet-g for longevity. No supports or skirt needed Snug friction fit so it stays attached.
I found this razor stand for Gillette Mach3 on Thingiverse, but did not find any on Printables. This upload should make it easier for others to find a suitable stand. I am not the original author. Please see the Thingiverse link for more…
Stick to the shower wall with some double-sided tape.
This is a stand for the King C. Gillette safety razor to stand up and ready to use.
It's printed upright with a brim for adhesion. Printing it flat also works fine but imo it looks nicer printed standing up. 3M VHB tape is probably an overkill but it works fine for mounting it to the tiles. The filament is PolyTerra…
Simple stand for holding a Mach3 razor. Will probably fit other disposable razors. Print it laying on it's back and you won't need supports.
Fast and easy print No support or brim Protects the blade from being damaged in your toiletry bag Protects your fingers from being hurt when you pick your shaver out of your toiletry bag The Blade can dry inside the case If you use…
- easy print / einfacher Druck / jednoduchý tisk - no supports / keine Stützen / bez podpěr Just stick with double-sided tape / Einfach mit doppelseitigem Klebeband festkleben / stačí přilepit oboustrannou páskou
These 3 sets of base plates will convert your vintage Fat Handle Gillette Tech safety razor into a Semi-Adjustable razor. The plate sets come in either an open comb, safety bar, or a combination of the two. Each set includes 3 base plates…
This is a special travel box for Gillette Fusion 5. The box uses a filament hinge, after assembling slide in a bit of 1.75 mm filament and the hinge will work. The box also features a battery holder since the model of shaver is electric.
einfacher und effektiver Gillette Rasierer Halter, befestigt mit Doppelklebeband
Since I couldn't find a cover that fits (Gillette Fusion _almost_ fits, but not quite), I made one myself. It should fit quite snugly around the blade. The small ledge at the base is for laying it down flat on the table (see photo). Print…
My wife has been using these razors for years but hates the way they travel. This lid attaches to the refill retail packaging after it's opened and makes the razor travel-ready. Prints without support in whatever rigid filament you…
A stand for holding disposable razors. The included g-code is for PETG, but this can be printed in other materials too.
Holder for Gillette MACH3.
A handy and lightweight take-along frame for the Gillette Mach 3 razor. This Thingiverse design template offers a handy solution for Gillette Mach 3 razor users who want to carry their razor safely and securely on the go. The take-along…
Found a nice model on Thingiverse and remixed it and want to share it here aswell. printed with PETG - no supports
A 1x1 gridfinity that holds a Gillette razer.
Whenever I needed to take my razor with me, I used to stick some tape on the blade, so that it was safe and the internal of my backpack as well. Obviously this wasn't the best solution and because of the fact that there is a 3d-printer…
The tittle says everything. I used Command to glue it on the wall ===== If you'd like to support me you can post a make, comment and/or pay me a coffee at PayPal Print Settings Printer Brand: TEVO Printer: Tarantula Rafts: Doesn't Matter…
Modded Gillette Venus Razor Holder by Bebbo to fit a 25mm shower tube. Also remixed one more sturdier with more space between the tube and the razor to better fit the angled type razors. Added pegs for better retention.
Did you break your Gillette Fusion 5 handle? Leave it at your in-laws' house on vacation? Maybe your significant other accidentally bought a Sams pack of Fusion 5 replacement heads instead of the ones you normally use? Well fear not my…
Cover for Venus razor 5 blades
Minimalist stand for safety razor and a brush. Modeled for King C Gillette products. I couldn't find a suitable stand for the Gillette brush as it has no obvious contact point like many other brushes do. The holder holds the blade at a…
For some reason the original version didn't fit my razor so I've tweaked it.
Das ist eine Duschwandhalterung für einen Damenrasierer der Marke Gillette Venus. Dieser spezielle Rasierer hat eine etwas andere Form als normale Rasierer und deswegen haben die Halterungen, die ich hier gefunden haben nicht gepasst.…
Made this years ago and have used it since. About time to share it. Gillette razor travel case Made to fit Gillette razors. Likely to fit others (not tested) Razor is secured - throw it into the toliletry bag without fear that it will…
Gridfinity box for the Gillette ProGlide razor and a refill pack. Base Gridifnity generated with Perplexing Labs .
Since I rarely use the trimmer guards on the Gillette Styler, and don't have a bathroom counter, I made this wall mount to free up valuable real estate around the sink. I mimicked the design of the original Gillette Styler holder as well…
This is a Gillette Single Ring Safety Razor that i have modeled after my own Gillette from 1907. I bought from a flea-market a few years back, and i was boared one day, so i made a 3D printable version of it, and it should be around 99%…
Mixed two models to make a workable Ikea Tisken holder for the Gillette Venus razor
🪒 The Perfect Travel Companion for Your King C. Gillette Razor Never worry about traveling with your safety razor again! This custom-designed case is specifically engineered for the King C. Gillette razor and provides secure storage for…
Semplice supporto con bioadesivo a parete per reggere un rasoio Gillette e la custodia per quattro cartucce ad incastro.
Das ist ein Wandhalter für den Gillette Fusion Rasierer. Gedruckt ohne Stützen. Benötigt wird: Doppelseitiges Klebeband 1mm Stark. Viel Spaß damit
For some Organization in my shelf I thougt why not hang my Razor, because it used a lot of space. So I designed this Model with a 5mm thick pin in the back to stick it in those little holes made for pins to hold the boards. I only tested…
** 17.10.2017 new improved version that allows for the razor to dry better
Schutzabdeckung für einen Gillette Rasierhobel
you must change dimensions! I made it for my big squeegee, but if you change dimensions it can be used for gillette
To always have all the bathroom gadgets at hand, I designed this Stand that organizes the razor and its accessories in a single object. The design was studied to be beautiful to look at and to display on a shelf. It is easy to print, the…
The model I remixed had no support for spare razors, it was generic.
Hi i ran into a problem with my cartridges, they are so many i had to stack them. So i made a small rack to stack them Print instructions Category: Bathroom Print Settings Printer Brand: Prusa Printer: I3 MK3S Resolution: 0,15 Infill: 15%
Box for disposable razor gillette venus 3
Tento model bol navrhnutý s cieľom vytvoriť jednoduché a funkčné úložisko pre holiaci strojček Gillette Blue3 . Držiak zabezpečuje, že žiletka po použití správne vyschne, čím sa predlžuje jej životnosť a udržiava sa hygiena v kúpeľni.…
I needed a compact case for my Gillette Mach 3 Shaver that would fit well in most toiletries bags. Vent holes have been added to the top and bottom to help ensure the shaver does not stay damp and any water would drain out of it quickly.…
Hangs from shower rack. Holds razer perfectly
I needed a holder for my razor that took up less space than the other models. I achieved this by Removing the spare razor blade holder so that it held only the razor.
Heres a remix for the Gillette Styler you can stick to your wall
Wallmount for a Gillette Fusion to stick on
Not yet tested, but I figure bridges beat shallow slopes.
Stand for one Gillette Proglide 5 including the small plastic thing holding 4 blade-bars. Printing with about 35% infill is pretty fine.
Printed mine with simple pla in vertical position for better layer strength
Dies hier ist das original Model von @DGA_3D mit einem zusätzlichen Untersetzer für den Gilette Fusion Ständer. Der Ständer war durch seine Löcher im Boden nicht dafür geeignet in meinen Schrank gestellt zu werden, da herunterlaufendes…
This is a holder for Gillette Venus that fits a sheet metal shower shampoo storage. No Support, PLA, 0.2 resolution.
A stand for a Gillette razor and blades for Gridfinity systems with the correct base for using magnets.
These 3 organic base plates will convert your vintage Fat Handle Gillette Tech safety razor into a Semi-Adjustable razor. Each base plate is marked with one, two, or three dots indicating the efficiency level ( 1 dot = mild, 2 dots =…
This 3D printed holder is designed specifically for Gillette Venus razors, providing a snug and secure fit to keep your razor organized and easily accessible. Its compact and minimalist design makes it perfect for mounting on bathroom…
Compact gillette case or holder with drainage holes. Item is split into 2 parts for reliable printing, use super glue to join one to another. No recommended printing settings Do not clean in dishwashers as there is a risk of warping, even…
This is just a simple holder for the Gillette Venus Razor. The included stl is for a glass thickness of 7.8mm. I've included the freecad file where you can adjust the glass thickness gt in prop as shown in the image. Just measure your…
Handydandy travel case for the longer King C Gillette safety razor The name is fairly self explanatory. Plenty of travel cases out there for other popular safety razors but none for the one that Gillette offers these days. Annoyingly, the…
Aufbewahrungs box für die Tür vom Spiegelschrank. So kann ich zwei von den kleinen Klingenboxen in der Schranktür aufbewahren und die fliegen nicht sinnlos im Schrank rum. Passt für diese Klingen: https://amzn.to/3lvjKdE Andere Klingen…
I printed this in PETG on my Prusa Mini+ with 0.20mm layer height and 100% infill. I only recommend enabling supports in the middle of the underside, if they attach to the outside of the stand, it will be ugly after you remove it. I used…
This design was made to suit a Gillette “Fatboy” adjustable safety razor, but works with many others, so long as the base of their handle is less than 13.5mm in diameter. (Holder is 14mm diameter) Tested with a Fatboy, Slim Adjustable and…
Vertical stand for Gillette Fusion Proglide. 90° rotation for flat printing, very few supports required. Print settings: Nozzle: 0.4mm Layer hight: 0,12-0,2mm Infill density: 30% Supports: Organic Material: PETG
The cap that protects your sink/bath from the awfully rusting Gillette cans. Made with this parametric model: https://www.printables.com/model/582538-intuitive-parametric-can-lid-cap-model
Materiál může být PLA nebo PETG, přesnost 0,12 - 0,2
Printet in PETG but PLA is fine too
Accidentally bought the wrong razor blades? No problem. With this adapter you can use a razor Gillette Contour with Gillette GII blades. Print Settings Rafts: Doesn't Matter Supports: No Resolution: 0,1 Infill: 25% Category: Bathroom
Gillette Razor Blades Holder Just a simple holder in case its of use to anyone else. Designed to stick on the inside of a bathroom door cabinet, it will hold a pack of 4 Gillette blades.
My Gillette Fusion shaver did not come with any protection for the razor blade head, so I designed this one to protect it when travelling. The model is meant to be printed in TPU ! I have not tested it in other materials and do not think…
Longer round slot to fit a full sized Gillette Tech. Print Settings Printer Brand: Solidoodle Printer: Solidoodle 2 - Pro Rafts: No Supports: No Resolution: 0.2 Infill: 20% Category: Containers
Use an 5mm Allen key to mount. (Slow Printprofile, cause I printed it in PETG) the mounting hole is 10mm in Diameter. Fits into the holes of this design: Extra long Shower Shelf for Shampoo and Soap
I was tired of always knocking over my antiperspirant gel and all the other items on the counter. I tried several options and things but they all ticked me off and did not fit what I wanted so here it is, my answer to the problem. My…
15mm, 16mm, 17mm inner diameter was made. You can choose what you want.
Gillette razorblades box hanging adapter is small enough to hold only the box that you are using, while saving some space on your bathroom countertop, or time to find the pack in your bathroom cabinet. Tips: Do not push the razorblades…
GILLETTE - ARCHER - WALL ART
