Philips Hue Dimmer V2 Elko Plus mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a mounting adapter option for a double Elko wall panel frame
- Rating
- 4 / 5
- Likes
- 20
- Downloads
- 148
- Makes
- 2
- Views
- 1,719
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This lets you mount your Hue Dimmer (v2) inside a double Elko Plus frame.
Since the new Hue Dimmer has a magnet inside i designed this to mount tho allow the dimmer to be partially proud of the adapter. The Dimmer fits snugly inside the mount and allows the dimmer to be taken out easily. The metal washer on the back of the mount holds it safely in place.
Printing setup:
I printet this with face side down on the printbed to get a texured finish. I added supports.
If you would like to print this face side up, I recommend splitting the model so it lays flat on the bed. The backside is not flush.
Mounting:
Glued a metal washer inside the the indent on the back. Mounted inside the Elko Plus frame and used a woodscrew to fasten it to the wall.