Extension Riser Kit for Redshift Quick-Release Aerobars
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple, useful and functional design to raise the redshift quick release aerobars.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 77
- Makes
- 0
- Views
- 767
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial
Simple, useful and functional design to raise the redshift quick release aerobars.
I printed it in PLA and I had no problems in assembly, if you need more security you can use PETG or ABS.
It is 15mm high, if you want to raise it to 30mm simply scale it on your laminator. I do not recommend overlapping two 15mm
Printing recommendations
-PLA
- 100% filling (for more security)
- 4 top and bottom layers
- no supports required
- layer height 0.2
- perimeter loop: 3
- 30mm/s
You will need:
15mm spacer = M6 x 30 mm bolts
30mm spacers = M6 x 45 mm bolts
The model it was made by me, please dont sell it.