Counting matching models…
As said, two versions with and without Gopro mount. The uploaded STLs are designed for an inner spacing between the bars of 75mm and a bar diameter of 22,3mm but those parameters can be fitted to your needs in Fusion. parts for Gopro…
Lift up your aerobar and save your back! Should be compatible with Profile Design aerobars. Tested with Profile Design Legacy II. Handlebar diameter: 31,8mm Print and use at your own risk! Additional parts required You need 4 x M6 screws…
I made these simple risers for my Profile design aero bars. Note that these will not work with all aero bars. You need to rotate it so that the side is flat on the print bed. Recommend ridgid filament. I used PETG & it is a bit too…
Enhance your cycling setup with our Aerobar mount designed for Garmin or Wahoo cycling computers, featuring a GoPro adapter for easy attachment of accessories like cameras or lights. This versatile mount ensures a secure and streamlined…
a mount for speedometer and light between my aerobars. mount with zipties OD Aerobar 22,3mm Distanze between Aerobars (middle): 127,7mm Printing: 0.2mm Layerhigh ASA 4 Walls 15 % Gyroid
A mounting plate for a standard bike bottle cage so it can be mounted between the arms on an aerobar. Designed for 3T Vola aerobars, where the extensions are really close to each other and most BTA mounts don't work. The plate should be…
Аэробар предназначен для трековых и шоссейных велосипедов. Анатомический стильный дизайн, функциональность и легкость – важнейшие качества этого изделия. Есть возможность подключения дополнительных устройств
Single sided mount for Garmin GPS unit on aerobar like Deda Parabolica (diam. 24mm). I find easier to mount and set my aerobar with this single sided mount for my GPS Parts needed : 1 garmin original mount with its 2 screws (from another…
Armrest, Profile Design compatible. You'll have to figure out how to attach armrest pads... I printed mine the PA-CF which is very light and strong and I've got thousands of miles on it. I suppose Nylon or other materials would work too…
This is a 5mm spacer for Felt aerobars. The height can be increased in the slicer to make it 10, 15, 20, etc. mm tall. I didn't realize it was low poly. If that's an issue for you, then you can upload it to Tinkercad and add bezels to…
This mount allows you to attach a Garmin or Wahoo bike computer under a bottle cage placed between aero bars. It provides a clean, aerodynamic, and compact setup , perfect for triathlon or time trial positions. Positions the computer…
Simple, useful and functional design to raise the redshift quick release aerobars. I printed it in PLA and I had no problems in assembly, if you need more security you can use PETG or ABS. It is 15mm high, if you want to raise it to 30mm…
The following is a low cost adjustable kit designed to convert cheap 22.2 L-Shaped aerobar extensions to a more modern position. The goal is to recycle existing components often found in the bins of a local bike co-op into something you…
fits 22mm aero bar extensions and be held on with zip ties
I cut an mtb bar in half and made this bracket to clamp it to the bars.
You'll need to drill the holes a little bit bigger to fit the bolts through… or adjust the hole size to be bigger. As the Wahoo bolt spacing and the GoPro bolt spacing is very slightly different.
Da meine Halter der Aerobar sehr nah beieinander sind, habe ich keine passende Bridge dafür gefunden. Die Bridge ist für den Syntace optimiert. Zwei Löcher sind für Kabelbinder vorgesehen. Bei mir ist es so straff, dass ich diese nicht…
TPU-printed Aerobridge designed for easy customization—tube diameter and center-to-center spacing can be adjusted parametrically to fit a variety of aerobars. The bridge features top and bottom holes for two Garmin-style mounts, allowing…
A set of spacers designed for the DEDA Parabolica Uno aerobar for 35 mm handlebars. Designed for precise armrest height adjustment according to the rider’s individual needs, allowing for a more comfortable and efficient riding position.…
It is a holder for the sigma bc 14 cycle computer. The holder is intended for the end of aerobars. The cycle computer is held at the same angle as your aerobars. The original computer holder fits snugly into the printed holder. On the…
There are two files. The extension body and its insert. Thanks to Prusa Slicer you can make it shorter or longer. Its up to you. PETG works well. Probably fit almost all aerobar extensions and works also with mechanical shifters as well.
This is a simple D-shaped piece that fits between two 22.2 mm extensions bars of an aerobar ("Triathlon-Lenkeraufsatz"). Its upper radius is 31.8 mm to accept common zip-tied accessories and the bottom is flat so it doesn't stick out…
Hello, For my Roadbike with which I want to ride long endurance trips, I put on some Quick-Release Aerobars from Redshift. 22mm OD 19mm ID Since I have the SRAM Red and wired Blips, I designed some Endcaps for the Aerobars to be able to…
Motivation my commutes these days are about 5-9 miles long & I find it faster & more comfortable to stay in the aerobars 95% of the time, the exceptions being rough roads with potholes slowing down/using brakes delicate maneuvering…
This TPU-printed Aerobridge is designed to slide easily over your aerobars, providing a stable and versatile mounting platform. The top and bottom feature integrated holes for two Garmin-style mounts—perfect for attaching a cycling…
I like the aero bag, but not the buckle on every side. With this you can close the rolltop directly and get rid of the straps on the side. Tested with supports on the bed and PETG.
I designed and printed a mount to hold the Garmin 530 unit at the end of my aerobar extensions. A larger unit may require more space. Version 2 is what I rode for 370+ miles with zero issues so far. If I had any issues, version 3 could be…
Stackable aerofoil shaped aerobar spacer kit 15mm - 75mm height, designed in Fusion 360 parametrically Currently for 31.8mm handlebars, and 50mm and 42mm hole spacing. Might be compatible with Profile Design. WARNING: DO NOT USE 4.4 GRADE…
I printed it with ASA filament (highest UV resistance), but the design should also work with other materials. To mount the adapter please use three 15 - 20 mm straps: One central strap fixes the Adapter on the aerobar Two straps secure…
Design for my setup with Profile Design aerobars. I wanted to put the light at the top so it does not get soiled so easily during the winter months. Also it is close to the power bank in the bag below. Secured with 4x5mm zip-ties,…
Cross bar to mount a Garmin Edge 540. (Though I think the mount is universal so other models should work too) Designed to see the Garmin front and center, without getting in the way of your arms. Sits between 24mm aerobars, space between…
Replacement for this plug , P.# 168430, used on Profile Design “carbon stryke” aerobars & probably others recommend printing in TPU, but also could be resin printed (design is optimized for FDM printing) no support necessary plugs are…
The following is a low cost adjustable kit designed to convert cheap 22.2 L-Shaped aerobar extensions to a more modern position. The goal is to recycle existing components often found in the bins of a local bike co-op into something you…
For my road bike, I needed to add +/- 1cm in height for my aerobars. I have a 31,8mm handlebars and Pro Missile Aerobars. I chose 9mm because M5x25mm is OK. Perfect fit for me! Simple design, but ok for me. Printed in blue, not to fit…
Aerobar risers for round Profile Design base bars. Place bottom on print bed for strength (unlike in photo). Mounting risers directly to a round base bar is a safety risk. Be sure the risers won't spin around the bar, especially when…
This is designed to attach a second, dummy handlebar to aerobars. Aerobars usually take up all the space on the main handlebars, leaving no room for lights, a Garmin mount, etc. It bridges the gap between the skis like so:…
Designed to replace the rounded end caps of the Profile Design T2+ aero bar. http://www.profile-design.com/profile-design/products/aerobars/aluminum-aerobars/t2-plus.html My aero bars end caps got roughed up a bit from an accident so…
Gopro klite aerobar tt bars mount. Fits 22mm bars, uses m5 lock nuts and bolts.
![Garmin Mount for Aerobars [parametric]](https://media.printables.com/media/prints/878658/images/6738792_8b57a8b9-5bd2-4d0c-9765-a5bec375e787_55f80f7d-9ae8-4304-b229-628c4828e804/20240513_114330.jpg)
![Wahoo Mount for Aerobars [parametric]](https://media.printables.com/media/prints/adcf97cd-4f21-4667-adeb-4e3b9f951e91/images/10376479_36ca1252-17dc-44fd-adc6-a93c78e58985_07e9ad91-3dc2-408a-840a-005ac331612b/2025-08-03-21_46_18.png)
