Split 24 to 29mm Rocket Motor Adapter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
29 mm rocket motor adapter split in half for easier use. Designed for Aerotech 24 mm rocket motors with a thrust ring.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 75
- Makes
- 0
- Views
- 289
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
A 29 mm rocket motor adapter that accepts smaller 24 mm Aerotech composite rocket motors with a thrust ring. Split in two halves, the motor is placed inside the adapter with an inset space for the 24mm thrust ring. The forward end of the adapter is open to allow longer motors, the two halves of the adapter are brought together then slide inside a 29mm motor mount.
IMPORT NOTE: Some sort of Motor retainer mut be used to restrain the adapter and meet NAR Safety code. Tape for the halves is optional usually not required. Printed with PLA or filament of choice. May need to be replaced after several launches due to heat.