Counting matching models…
Solid D-pads, due to their geometry, incorrectly register diagonal inputs if a cardinal direction is pressed too hard. Split D-pads solve this by having a separate pieces for each directional button, which eliminates cross-button…
My dog managed to get a hold of a mitten and destroyed a d-ring. I therefore needed a ned d-ring to replace the old one, that was sewn on. This d-ring slots on to existing loops, no needle and thread needed! Height, width and thickness…
KDxGP STRECHR.SPL Check out my socials and other things at https://linktr.ee/KDxGP Like my creations? Consider buying me a coffee ☕ at https://www.buymeacoffee.com/KDxGP. Thank you! STRECHR.SPL comes in two different heights: 15mm and…
I just split the model to make it fit to the printed of the Prusa Mini+ I use it for my 1/24 AX24 crawler. happy drive - printing ;)
Rotating URBI thing, but now, properly split up
Split into two components Origin: https://www.printables.com/model/647345-ikea-skadis-files-holder
To print and use: Follow @suit's original printing and assembly instructions . (Print flat on bed, in PETG). Mount the front MC4-M6 connector and PTFE guide. Print and assemble a y-splitter of your choice. The one pictured is the splitter…
Original model works really well, just needed a little clearance cut in for my car.
Split into two components Origin: https://www.printables.com/model/649489-skadis-caliper-holder/files
This version has these improved features: ramped front catch text for multicolor ramped latch fixture for easier assembly The Snap Latch snaps into a locked state when it is pressed towards the box front and it passes over a retaining…
This version has these improved features: ramped front catch text for multicolor ramped latch fixture for easier assembly Look in my Ammo Boxes Collection https://www.printables.com/social/261776-brass_ring/collections/167118 to see my…
I often have the problem of making wrong inputs on the snes controller so i made one with four physically separated parts acting as individual buttons i am quite new at 3D modeling so some stl files look a little bit messed up, but print…
Solid D-pads, due to their geometry, incorrectly register diagonal inputs if a cardinal direction is pressed too hard. Split D-pads solve this by having a separate pieces for each directional button, which eliminates cross-button…
This cover was designed to clamp onto the umbilical cable without needing to disassemble the cable. Based on Fiction's Exhaust Cover , but re-implemented in OpenSCAD. Scad files included for customization. Requires adrianschlatter's…
The adapter enabels a second line for suction with a vacuum cleaner. While one side fits to the table saw, the other two are for a 35 mm line (inner diameter) and a 32 mm (outer diameter) line. In my case, I used this for an additional…
remix of the previous version closed off the cable channel more and added an ECAS option + tried making it editable again for the connecting hexagon refer to the original
Wall Split Flange Round Escutcheon Plate Cover for Various Pipes / Pipe Collar / Copritubo per idraulica Pipe Ø: Ø 20.7mm/ 0.81 inch Ø 25.8mm/ 1.1/2" Ø 29.9mm/ 3/4" inch Ø 33.7mm/ 1" inch Resize to adjust dimension If you download/enjoyed…
Voron micron+ JST junction box for LED lights. Fits snuggly in the extrusion. please leave ⭐ review and rate. Check out my other designs. https://cults3d.com/en/users/3DeezNutZ/3d-models https://www.printables.com/@3DeezNutz_752861/models
This is an extender/splitter to allow four additional items to be hung from one hook (with the original hook still available for a fifth item). It was originally designed for Command Medium Clear Wire Toggle Hooks , but the model could…
--- English --- Housing for the MT300N (Mango) and one of these chinese PoE splitters. Thus the devices have a significantly higher WAF. --- Deutsch --- Ein Gehäuse für den MT300N (Mango) von GL.Inet und einen der chinesischen…
Look in my Ammo Boxes Collection https://www.printables.com/social/261776-brass_ring/collections/167118 to see my ammo boxes with different latches and hinges options. Other ammo boxes of this type can be found in my Double Spring Latch…
This is a multi-fan mount designed for 3 4020 fans (I may add a 4 fan model in the near future), that is designed to mount a XH Splitter fan port multiplier board. I created several places where zip ties can be used to secure fan cables…
Phillips Norelco 3000 holder with reinforcement and split into two interlocking pieces for printing flat
I just split the model to work on my Anycubic Kobra S1. should be fine for printers of similar size. It needs supports for the dove tail and the back side of the quick connector. No gluing needed, the quick connect will lock the two halfs…
This clamp helps you keeping you window or door fixed while you use a portable split AC like the Midea Portasplit. I printed it in PLA, but PETG or similar would certainly work as well.
I frequently change between MMU3 use and regular mode use. To avoid swapping tubes between MMU3 and regular use I created a Y-Splitter, which is compatible with the Prusa CORE One and the MMU3 Enclosed version. Since the length of the…
I frequently change between MMU3 use and regular mode use. To avoid swapping tubes between MMU3 and regular use I created a Y-Splitter, which is compatible with the Prusa CORE One and the MMU3 Enclosed version. Since the length of the…
I frequently change between MMU3 use and regular mode use. To avoid swapping tubes between MMU3 and regular use I created a 3-Way-Splitter, which is compatible with the Prusa CORE One and the MMU3 Lite version. Since the length of the…
I frequently change between MMU3 use and regular mode use. To avoid swapping tubes between MMU3 and regular use I created a 3-Way-Splitter, which is compatible with the Prusa CORE One and the MMU3 Lite version. Since the length of the…
I frequently change between MMU3 use and regular mode use. To avoid swapping tubes between MMU3 and regular use I created a 3-Way-Splitter, which is compatible with the Prusa CORE One and the MMU3 Lite version. Since the length of the…
I frequently change between MMU3 use and regular mode use. To avoid swapping tubes between MMU3 and regular use I created a 3-Way-Splitter, which is compatible with the Prusa CORE One and the MMU3 Lite version. Since the length of the…
This is a quick drain guard that fits over the end of the clear PET drain hose that comes with Midea, Pioneer, Senville, Mr. cool mini splits/heat pumps. Didn't want any flying insects or spiders crawling up in there. This should snap…
Carrier ac/split mini remote that works with modular desk clamp
Easy to print , enable support. I print my brackets always with 100% infill but it may be overkill. The OREI HDMI splitter model is HD-102 available on Amazon for 20 CAD:…
This version has these improved features: text for multicolor ramped hinge fixture for easier assembly Look in my Ammo Boxes Collection https://www.printables.com/social/261776-brass_ring/collections/167118 to see my ammo boxes with…
This version has these improved features: text for multicolor ramped hinge fixture for easier assembly Look in my Ammo Boxes Collection https://www.printables.com/social/261776-brass_ring/collections/167118 to see my ammo boxes with…
This version has these improved features: ramped front catch text for multicolor ramped latch fixture for easier assembly ramped hinge fixture for easier assembly The Snap Latch snaps into a locked state when it is pressed towards the box…
This version has these improved features: ramped front catch text for multicolor ramped latch fixture for easier assembly ramped hinge fixture for easier assembly The Snap Latch snaps into a locked state when it is pressed towards the box…
This version has these improved features: ramped front catch text for multicolor ramped latch fixture for easier assembly ramped hinge fixture for easier assembly The Snap Latch snaps into a locked state when it is pressed towards the box…
This version has these improved features: ramped front catch text for multicolor ramped latch fixture for easier assembly ramped hinge fixture for easier assembly The Snap Latch snaps into a locked state when it is pressed towards the box…
This version has these improved features: ramped front catch text for multicolor ramped latch fixture for easier assembly ramped hinge fixture for easier assembly The Snap Latch snaps into a locked state when it is pressed towards the box…
This version has these improved features: ramped front catch text for multicolor ramped latch fixture for easier assembly ramped hinge fixture for easier assembly The Snap Latch snaps into a locked state when it is pressed towards the box…
This version has these improved features: ramped front catch text for multicolor ramped latch fixture for easier assembly ramped hinge fixture for easier assembly The Snap Latch snaps into a locked state when it is pressed towards the box…
Made this for my QBox at tangle sensor. Suggest printing: Mat: ABS - PA612-CF or equivalent (NO PLA) Layers: 0.08 ~ 0.12 max full walls and 100% infill or you can try 1 wall-100%infill with ALL SOLID SURFACE ironing SEE VIDEO…
This is Remix of Ed Johnson's PTFE filament y-splitter to be mounted ontop of a SOVEL SH02 filament dryer with double sided tape.
Rotated the bracket for the Q2 Box 4 to 1 Splitter/Manifold to horizontal so that the 4 PTFE tubes entering the manifold have a lesser radius curve and a longer ‘straight path’ before reaching the manifold. Others found this orientation…
This is my first ever functional design. I'm definitely not an expert, I'm still learning a lot about 3D modeling and printing, so this was a big practice project for me. It might have some small errors or issues, but it’s working pretty…
Tato rozevírací forma na vosí hnízda (šišky) je vylepšená verze mého původního autorského modelu , který vznikl před několika lety kdy jsem dostal nápad jak udělat vánočnější "vosí hnízdo"a šiška mi přišla ideální dekorace i tvarově…
Power supply splitter XT60 x10 for Camera and DVR with voltage and current panelmeter ...
This latest version features enhanced tactile response, smoother operation, reduced actuation force and a BRAND NEW forward trigger paddle that speeds up your reaction time. This is the latest and greatest for the VKB Gladiator line of…
I needed a simple cover for the cut out that this 6in vent duct goes through in the wall. This split flange allows the trim to be added after the duct is run through the rough cut hole. It will cover a gap of up to 1in and uses standard…
My printer was too small to print the whole wheel in one go. It won't fit a 256 x 256 bed. My brother helped me split the wheel in 2 in CAD with connectors that need to be glued together to make it strong enough. I've been using it for a…
This is a remix of the Core One + spoolholder split into two pieces, one containing both a male and female bayonet fitting and the cap with a male fitting. This uses two O rings of the same type as the standard spoolholder. One piece can…
Update 05.03.2026: Front fender seal was missing in the previous version, and was corrected today. Update 22.02.2026: Factory style working hinges are added. This required a ma jor revision of the body and dashboard. The engine cover…
This is a sci-fi inspired case for the Halcyon Elora from splitkb.com I used the official dxf files from their GitHub. As you can see from the pictures, the touchpad and the encoder wheel are supported (on both halves, as the cases are…
The original Toolholder requires quite a bit of support to print, and it leaves a rough suface on some larger areas. Since the part doesn't see too heavy loads the print orientation shouldnt matter that much. Print the two parts and…
A low-profile, modular mount for two 120mm fans (specifically designed for AC Infinity Multifan S3-P / S7-P) to create active airflow in a server cupboard or AV cabinet. Designed to fit on a standard 210x210mm build plate (like the Prusa…
Description In order to use my Qidi Box to print in multi-color while keeps at least one channel for external manual filament feeding. I personally have printed many Y-Splitters that I found on the Internet. Most of them were failed on…
This repo is going to show the process of me designing, printing, working in KiCad, Fusion360, and overall building this split keyboard. I plan to explain the issues I didn’t know were issues until it was too late, and show how I managed…
I printed the official framework 16 mainboard case and found that the design was lacking in support for the expansion cards, resulting in the cards sagging and stressing the USBC port. You will need to print 5 connector pins to join the…
Update 05.03.2026: Front fender seal was missing in the previous version, and was corrected today. Update 22.02.2026: Factory style working hinges are added. This required a ma jor revision of the body and dashboard. The engine cover…
a rally front spliter for the arrma infraction 3s / mega Category: R/C Vehicles
If you’re browsing this model, you’re already part of the undead crew — drop a Like to help it climb the charts 🧟♂ What’s included Model 1: Crouching Zombie on rubble slab (single-piece) Model 2: Blown-Apart Zombie (top half crawling away…
Improved version of the original V1 hinges for Ratrig V-Core 4 500mm and 400mm! The corner brackets do not have to be removed anymore. Original version: https://www.printables.com/model/1090231-ratrig-v-core-4-split-front-panel-hinges…
Update 07.02.2026: The roof shape was corrected. Working door hinges were added. The original body is removed and replaced by the corrected roof. Update: A subscriber pointed out a discontinuous roof-A pillar transition. I made another…
A clean and efficient 4-section split cup designed for acrylic pouring, resin art, and other fluid-art techniques. Each of the four compartments keeps colors separate until the moment of the pour, giving you smooth gradients, layered…
Es handelt sich um eine geteilte Kabeldurchführung, die die Kabel vor Beschädigungen durch scharfe Kanten schützt. Ich nutze sie für das „ PrintClosure Project ”, um den Kabelstrang des Netzteils nach außen zu führen. Die Acrylglasplatten…
Makes easier to turn off the volume fast with one move of a hand without fingers. Upper diameter - 30 mm Bottom diameter - 46 mm Height - 16 mm
Please refer to the original model for overall notes! All credit to the original maker for the design - I just tweaked it for the hardware I have available on hand. The jigs included in the original model file, with the exception of the…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 150.9x150.9mm in size You may print at higher layer heights below the Base Thickness of 0.56mm The Max allowed Thickness is 1.2mm and the Actual…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 150.9x150.9mm in size You may print at higher layer heights below the Base Thickness of 0.56mm The Max allowed Thickness is 1.2mm and the Actual…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 150.9x150.9mm in size You may print at higher layer heights below the Base Thickness of 0.56mm The Max allowed Thickness is 1.2mm and the Actual…
I needed a simple box to distribute a ground wire to multiple components. This is what I came up with. There are two boxes: one with 1 sidewall port and the other with 3 sidewall ports. Please DO NOT use this if you do not understand what…
I wanted to use this model that puts the spool holder at one of the sides of the printer: https://makerworld.com/en/models/189130-side-mount-ams-lite-spool-holder-hub The only thing missing was a splitter. I used one that gave me great…
Related Boxes https://www.printables.com/@brass_ring/collections/3088349 Heavy Duty Features: thicker box walls larger latch larger hinge protective fence around latch Print counts: 1 X Bottom 1 X Top 1 X Hinge Split Pin or 3 X Hinge…
A collection of 10" rack mount front panels ranging from 1U-4U sizes. The panels are split into multiple parts so that they can fit on a standard Prusa 3D printer bed. There are solid and hex hole patterned panels of each size. They…
Mount for CEE EU power split / distribution box / schuko verteiler a simple way to screw and fix the typical 3/4/6 way CEE power splitters
ECAS Combiner Y-Splitter This is a high-performance filament Y-splitter/combiner designed specifically for smooth transitions and reliable multi-material feeding. After struggling to find a splitter with a truly seamless internal filament…
Mountable ECAS Combiner Y-Splitter This is a high-performance filament Y-splitter/combiner designed specifically for smooth transitions and reliable multi-material feeding. After struggling to find a splitter with a truly seamless…
Bumper / Splitter Reinforcement for the Mini-Z Mazda 787B. Bolts with a couple of M2x6 tapered or button screws on the underside to add a bit of support and reinforcement to stop the cars body taking damage in the event of a crash.
I frequently change between MMU3 use and regular mode use. To avoid swapping tubes between MMU3 and regular use I created a Y-Splitter, which is compatible with the Prusa CORE One/+ and the MMU3 Enclosed version. Since the length of the…
6x Split-Dish Stacking Shelf — Cabinet Corner Organizer Tired of your split soy sauce and condiment dishes rattling around in a drawer or taking up valuable shelf space? This 3D printed stacking shelf holds up to 6 split dishes vertically…
Welcome to CHAMv3 Split Edition! I am extremely humbled by the amount of people who have downloaded CHAMv3 and posted their makes! I owe any success to you all, and I hope the CHAMELEON project makes custom arcade sticks more accessible…
Very simple to print. Makes your standard water bowl more stable, trying to avoid your cat to spill water everywhere. Printed in PETG. Easy to wash and clean.
I frequently change between MMU3 use and regular mode use. To avoid swapping tubes between MMU3 and regular use I created a 3-Way-Splitter, which is compatible with the Prusa CORE One/+ and the MMU3 Lite version. Since the length of the…
I picked up a used copy of split-level aggravation and it was missing some of the player pieces. Designed this in Fusion so I could print out the missing ones. I printed this with the bigger end down on the build plate. Just like the…
Includes tabs for easy supergluing together. You will need something to rough up the tabs so they can bond together, as when PLA comes straight out of the printer there usually is ZERO surface for the glue to properly stick to. Sandpaper…
This is a watercolor half pan with a wall in it to allow it to hold two colors. I needed a split pan that would fit inside my favorite palette , and this particular pan fits it perfectly, so I remixed it to fit my needs.
The PTFE tubes are fritcion fitted into the splitter. Print it with a low stringing material, any strings inside the splitter can cause jams or blockage. (I used PETG-cf)
Most MX-Style switch openers are printed vertically, resulting in low stability of the "tips" which have to pry the switch legs open. This model has been designed to be printed flat in two pieces (both are identical, so print the file…
The parts are plated by colours set up for ideal print orientation and with supports as needed Use OrcaSlicer
Part Description: Top (three sizes 25.4mm, 30mm 31mm ) to match with: bottom m5 flat simple mounting hole to attach to any surface with m5 screw bottom m5 square allows you to mount with a timed rotation to: frame mount bottom custom…
Humanity meets machinery in this striking Half Human Half Machine bust. Split vertically down the centre, one side presents a smooth, lifelike human face, while the other reveals an intricate network of gears, pistons, and mechanical…
ECAS Combiner Y-Splitter 3 Way This is a high-performance filament Y-splitter/combiner designed specifically for smooth transitions and reliable multi-material feeding. After struggling to find a splitter with a truly seamless internal…
