Bowden Y-Splitter for Bambu Lab X1
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Allows to use Bambu Lab's AMS with external filament.
- Rating
- 4.768 / 5
- Likes
- 1,710
- Downloads
- 17,334
- Makes
- 160
- Views
- 65,744
- Reviews
- 125
Updated at source:
Model information
- Source
- Printables
- Category
- Bambu Lab Parts & Upgrades
- License
- Creative Commons — Attribution
Print with ABS or PETG with brim and without support. Cut bowden properly at 90 degrees and insert fully (15mm, using a rag and some force; the bowden inputs are slightly conical). It will hold very well. If you have problems, you could reprint the splitter slightly smaller, say at 98% or so.
Make sure to disconnect or switch off the AMS before feeding the external filament. A filament runout sensor switch at the external bowden input cutting the power to the AMS can do this automatically (see separate model https://www.printables.com/de/model/262945-bambu-lab-automatic-ams-switch).
You must use “UNLOAD” when removing the external filament, not manual retract. This will give the filament a clean cut and it will not get stuck in the splitter.
Please see also: https://www.printables.com/de/model/300273-bowden-tube-y-splitter-with-pc4-m6-connections and https://www.printables.com/de/model/584189-clean-bowden-y-splitter