Y-Splitter for BambuLab AMS
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Y-Splitter for BambuLab AMS, designed with clearance for PA-CF/PAHT-CF default settings
- Rating
- 4.813 / 5
- Likes
- 205
- Downloads
- 1,626
- Makes
- 17
- Views
- 9,536
- Reviews
- 16
Updated at source:
Model information
- Source
- Printables
- Category
- Bambu Lab Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Y-splitter to make it easier to print with or without the AMS. Designed for standard profile PA-CF or PAHT-CF, 0.3mm layer height, 0.6-0.8mm nozzle. The fittings just threads right in.
Uses 3x PC4-M6 which can be ordered of Amazon of Ebay very cheap.
https://www.amazon.com/s?k=PC4-M6
https://www.ebay.com/sch/i.html?_nkw=PC4-M6
Dont forget your PC4-M6 connector clip, to make sure the PFTE tube stays in place:
https://www.printables.com/model/401604-pc4-m6-connector-clip
Update: I've seen a lot of PLA makes, I highly suggest printing these in a material harder than what you normally print with, or the filament will grind out the model. It will take 6 month of printing but when it happens you are gonna sigh and dislike printing a second one. So make it in a material harder than PLA(assuming thats what you usually use) That way the splitter will grind the fillament instead, since its such minute it wont affect your printing, but after 6 month instead of having to replace the splitter you just have to blow away some dust.