Backpacking Stove / Fuel canister stand
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€1.22 – €1.49 net (excluding VAT)
For file: 100g_Canister_0.4n_0.2mm_PETG_MK4S_1h11m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.35 excluding VAT (range midpoint).
- Weight reported by the author
- 22 g
- Print time reported by the author
- 1.18 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Stand / Stabilizer for 230g and 100g camping fuel canisters.
- Rating
- 5 / 5
- Likes
- 106
- Downloads
- 470
- Makes
- 6
- Views
- 2,623
- Reviews
- 6
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial
I copied this here for archiving and to provide others with an easier print. I've adjusted the orientation and provided one that is reduced in size to accommodate 100g canisters. I printed mine in PETG using supports and 4 perimeters for strength. You'll need to print three of the legs and one base. G-Code is provided for those with an MK4s
To answer some likely questions - I use a 750ml Toaks pot , Stove is MSR pocket rocket deluxe, models for the thread caps and lid latch are below. Total weight with a full canister is 14.4oz / 409g. The stand itself comes in around 19g
Toaks Lid latch -
https://www.printables.com/model/1053104-toaks-750ml-lid-holder
Thread caps -
https://www.printables.com/model/1029281-gas-cartridge-stove-716-euro-thread-dust-cap-gaska/files