1 / 5
Powerstrip screw wall mount (vertical)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Power strip holder for smaller crosssections, vertical
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 10
- Makes
- 0
- Views
- 59
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I was looking for a mount that fits my powerstrip, but most are made for ones with a bigger crosssection. Thi one fits powerstrips with the following dimensions:
- Width (back side/opposite of the plug): 42 - 42.5 mm
- Width (at the rounded sides' widest point): 46.5 mm
- Height: 40 mm
The model has two parts:
- Mount with Endstop:
Designed for vertical mounting. this part keeps the power strip securely in place and prevents it from sliding out. The stopper allows insertion from only one side, so mounts on both the front and back of the power strip won't work. This part works best in combination with the second one. If glued to a surface it might work. - Open Arms Mount:
This simpler part has no stopper, allowing the power strip to slide or clip in and out freely. It can be used for horizontal mounting or when the strip needs to be easily removable. Also required in combination with the first part for screw mounting.
The screwhole is countersunk and has a diameter of 3.5mm