1 / 9
Sovol sv07 klipper screen side holder with 3 variants — image 1
1 / 9

Sovol sv07 klipper screen side holder with 3 variants

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

I couldn't find a klipper screen holder for the sovol sv07 (not sv07+), so i made one of my own

Rating
0 / 5
Likes
2
Downloads
23
Makes
0
Views
181
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

I had to place my sovol sv07 inconveniently and all the sideways klipper screen holders were for the sv07+ (not compatible), so I made it myself.

Use cases:

  • 30 degree stand with rib: a robust and ergonomic stand
  • 30 degree stand: a lightweight and ergonomic stand. may flex a bit
  • 15 degree stand: a low angle stand. Best if the printer is placed higher than chest level

!!DISCLAMER!! 

  1. Although the 30 degree stands do not go over the build plate, the screen does. This could cause collisions with prints that max out the X axis.
  2. Unfortunately, the ideal printing orientation requires a lot of supports, but it aligns the layer lings such that.
  3. In case it was not clear, these models are NOT COMPATABLE with the sovol sv07 plus

Tags