1 / 1
DasFilament 1kg spool repair adapter ring
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Spool repair adapter ring for slightly broken spools of DasFilament 1kg
- Rating
- 5 / 5
- Likes
- 0
- Downloads
- 19
- Makes
- 0
- Views
- 117
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
Had a broken running surface on a spool of 1kg DasFilament PLA which prevented it from running good inside the Bambu AMS.
To solve it I designed this adapter. It is mounted from the outside, 2 are needed for one spool. Can be hold in place with some minor drops of glue.
It is very thin, might be too thin if there are bigger damages on the running surface.
Print Settings
Rafts: Not necessary
Supports: Not necessary
Resolution: 0.4 mm
Infill: 100% (practically 0, only walls and top/bottom)