1 / 2
Hard Case for Anbernic RG406V
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Thin (sort of) protective case with joystick cutouts. Should also fit the RG405V.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 96
- Makes
- 0
- Views
- 655
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Portable Devices
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
As-thin-as-it-gets hard case for the Anbernic RG406V (and probably the RG405V).
Print the three parts separately, only the joystick cutout should require supports. Use 1.2mm x 31.8mm wire brads for the hinges like in the original. Glue the joystick cutouts into the lid from the back with superglue. As recommended by the original designer I lined the bottom and screen area with felt for protection and a snug fit.
This redesign should still fit the RG405V although I haven't tested it - please let me know if you have!