1 / 6
Automatic Centre Punch Holder Mount aka Center Punch
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Automatic Centre Punch Holder (aka Center Punch) built with a main body of 12.5mm diameter, in three mounting versions.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 7
- Makes
- 0
- Views
- 61
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Automatic Centre Punch (aka Center Punch) Holder.
Should fit any hand operated punch built with a main body of 12.5mm diameter, available in three mounting versions.
1. One with two small holes 24mm apart.
2. CS with a recess for a small poster command strip.
3. A Skadis version with two holes 40mm apart.
No supports needed, print on end as pictured.
@Filas print "gloves" is incorporated into the print just because.