1 / 3
Bathtub plug 40mm
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple design of a bathtub plug for 40mm drains.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 65
- Makes
- 1
- Views
- 180
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bathroom
- License
- Creative Commons — Attribution — Share Alike
A simple design of a bathtub plug for 40mm drains.
Should be printed with TPU (or flexible filaments).
Recommended settings
Infill: 100%
Nozzle: 0.4
Layer height: 0.12 IMPORTANT! (no more to avoid excessive overhangs).
I did an initial version 10mm high, but then I tested with an 8mm high version for a 10mm high drain and it was ok, as the pressure built on top of the plug by the water is enough to push it in place.