1 / 8
BNR32 - Nissan Skyline R32 GTR - Headlight / Headlamp stud adaptor — image 1
1 / 8

BNR32 - Nissan Skyline R32 GTR - Headlight / Headlamp stud adaptor

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This model is designed to allow a bolt to be used in the case where the standard stud is missing from the headlight.

Rating
0 / 5
Likes
3
Downloads
28
Makes
0
Views
329
Reviews
0

Updated at source:

Model information

Category
Automotive
License
Creative Commons — Attribution

Hey team,

This is a fairly obscure print for those Nissan R32 GTR owners out there with “N1” headlamps and are missing the central stud which holds on brackets for the centre grille.

Example image of the standard stud which should be present: Click here

For whatever reason, this centre stud was missing on my vehicle and I needed a solution for a blind hole and a keyway. The recess in the headlight didn't have any existing threads or obvious means of attaching a stud. I was also unable to find a part number for the stud in question, so I suspect the headlights on my vehicle may be from another R32 (non-GTR model), so these studs were likely not inserted by Nissan at the factory.

As a result I've put together a simple plug which goes into this recess and makes use of the keyway to prevent the plug from rotating when inserting a bolt.

In my case I designed the plug to accept a 20 mm M6 stainless cap head bolt, making use of the standard galvanised split washer which came with the new bumper grill brackets from Nissan (see part numbers below).

The plug is designed to be a snug fit and printed in TPU to prevent cracking. Once the bolt is inserted, the TPU will swell slightly making a tight fit and a strong anchor for the bolt. With the other screws inserted the bracket feels very solid and I'm happy with the result.

Regards

Part numbers:

  • R32 GTR Grill brackets: 26042-08U05,26092-08U05
  • R32 GTR Grill clips: 01553-03831

 

Tags