1 / 2
A-arm suspension for The Marmot rc car
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Alternative rear suspension for The Marmot, an RC car
- Rating
- 0 / 5
- Likes
- 21
- Downloads
- 118
- Makes
- 0
- Views
- 735
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial
A-arm type rear suspension for The Marmot - https://www.printables.com/model/1149568-the-marmot-110-scale-off-road-buggy
Instead of the swing axle type suspension included in The Marmot, this type uses the same a-arms as the front of the car.
You'll need four 3x35 mm dowels (or m3 screws), four countersunk m3x20 screws and m3 heat inserts for the arms. (No need for OD 6 mm tubes and mr106 bearing as listed with The Marmot)