Replacement Rack Ears (Mounts) for Behringer Devices
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement rack mounts for some Behringer rackmountable devices
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 54
- Makes
- 0
- Views
- 348
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Audio
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Had to make ears for an earless 1U Behringer device I had. Also made 2U because why not
1U fits Composer Pro-XL MDX2600 and Powerplay Pro-XL HA4700
2U fits Ultragraph Pro FBQ3102
Likely they fit some other Behringer devices, these are the ones I was able to test fit the mounts on
I recommend printing with 3 or more walls (assuming 0.4 mm nozzle) and no infill. Small holes don't really need supports, but the rack holes and the inside ‘bump’ might, depending on your filament choice and printer
The model is symmetrical, so you can just print two if you need both left and right mounts. Mirror flip one of them if you want the same ‘finish’ on top/bottom
Please comment, rate the model and kindly post your makes for everyone to see!
Advice and requests are welcome!