1 / 1
The lightest spool roller
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A standing filament spool holder that uses four 608 bearings and less than 13g of PLA
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 24
- Makes
- 0
- Views
- 183
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
Printed with 2 walls, 6 bottom/top shell layers, 15% gyroid infill, 0.08mm or variable layer height, 0.1mm initial layer
But even with 1 wall it has no problem with 1 kg spools.
You need 4 frame parts and 8 roller halves (or 4 of the single part rollers-made for).
Apply some superglue on the edge of the roller half after inserting the bearing into it and then press it together with the other half.
Should work with a 3d printed bearing too but tolerances will need to be adjusted.