Voron Trident Skirt - Wago Mounts/Ribbon Cable Passthrough
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Rear center skirts for Voron Trident (all sizes) with options for Wago terminals and/or a ribbon cable passthrough.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 28
- Makes
- 0
- Views
- 460
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- Creative Commons — Public Domain
The Wago terminals allow for an umbilical setup to be quickly connected/disconnected for maintenance or cable routing.
The ribbon cable passthrough is sized for a standard Raspberry Pi camera or display ribbon cable. Check out my Raspberry Pi mount here for more information on how that system works on my Trident! NOTE: Ensure overhangs are well-tuned on your printer for this version. If in doubt, keep a close eye around z-height 4.75mm when bulk of the bridging will occur.
Both features are optional. Match your printer size to the numbers in the .stl filename, then look for the ‘_wago’, ‘_ribbon’, or ‘_wago_ribbon’ at the end of the filename to select the correct option for your use-case. Enjoy!