1 / 4
Voron Trident Skirt - Wago Mounts/Ribbon Cable Passthrough — zdjęcie 1
1 / 4

Voron Trident Skirt - Wago Mounts/Ribbon Cable Passthrough

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Rear center skirts for Voron Trident (all sizes) with options for Wago terminals and/or a ribbon cable passthrough.

Ocena
0 / 5
Polubienia
6
Pobrania
28
Wydruki
0
Wyświetlenia
460
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Public Domain

The Wago terminals allow for an umbilical setup to be quickly connected/disconnected for maintenance or cable routing.

The ribbon cable passthrough is sized for a standard Raspberry Pi camera or display ribbon cable. Check out my Raspberry Pi mount here for more information on how that system works on my Trident! NOTE: Ensure overhangs are well-tuned on your printer for this version. If in doubt, keep a close eye around z-height 4.75mm when bulk of the bridging will occur.

Both features are optional. Match your printer size to the numbers in the .stl filename, then look for the ‘_wago’, ‘_ribbon’, or ‘_wago_ribbon’ at the end of the filename to select the correct option for your use-case. Enjoy!

Tagi