Prusa updated Fillament holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
After 2 broken filament holders from Prusa, I've decided to redesign it, and make an option to insert a CF rod.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 37
- Makes
- 0
- Views
- 224
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- GNU General Public License v2.0
The CF rod fits snugly within the printed holder and is repurposed from a broken drone leg:
I won’t be listing anything from AliExpress, as I do not endorse purchasing from them. The model is designed to fit a 16mm CF rod, but the stand functions beautifully even without it.
My design is compared 1:1 with Prusa's. Both my friend's and my print failed at approximately the same location (visible as the shiny superglued area). The holder was sliced according to the recommended settings.
This model was printed using Matte PETG at high temperatures, so be sure to check and adjust your filament temperatures accordingly.
Print settings:
- 0.4mm nozzle
- 0.2mm layer height
- 4-5 top and bottom layers
- 3 wall layers
- 15% infill
- no support
There are 2 versions available: 126mm and 150mm in width.