'Gem rock' mount for your articulating dragon
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€4.41 – €5.39 net (excluding VAT)
For file: Dragon stand (1)_0.3mm_PLA_MK3S_4h12m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €4.90 excluding VAT (range midpoint).
- Weight reported by the author
- 76 g
- Print time reported by the author
- 4.2 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
I needed a mount to display my articulating dragon so i made this 'rock' with gems growing on it and 2 embedded eggs
- Rating
- 4.833 / 5
- Likes
- 1,617
- Downloads
- 4,295
- Makes
- 37
- Views
- 51,425
- Reviews
- 36
Updated at source:
Model information
- Source
- Printables
- Category
- Sculptures
- License
- Creative Commons — Attribution — Noncommercial
Printed at 0.3 mm layer height in about 4 hrs. designs to print with no infill and no supports.
There are 2 holes under if you want to put an led light source to illuminate your gem crystals likewise you can paint the rock formation and even the dragon eggs to add some life to it. Enjoy
Update: I have added a revised scaled up STL and Gcode version at 120% if you have a larger dragon