Pimax VR Headset Wall mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A sturdy VR headset wallmount that'll fit those wide Pimax headsets, maybe others
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 18
- Makes
- 0
- Views
- 212
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Virtual Reality
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A sturdy wall-mount that will fit a Pimax 8K / Pimax 5K VR headset.
Remixed to mount closer to the wall so you can use smaller screws, features double the holes as well as brackets which should add some strength, and dowels to connect the face-rest and wallmount more easily.
The tolerance on the dowels may be off, it's my first time designing one. If I were you I would print three pairs with thickness and width incrementing by like half a millimeter to see what fits best for your printer.
The holes for the screws are about 5mm, so a #10 or #11 screw will probably be best. I'd recommend the use of wall anchors.
- Printer brand: Anycubic
- Printer: Kobra 2 Pro
- Rafts: Doesn't Matter
- Supports: Yes
- Resolution: I used .2mm layers
- Infill: I used 35% cross-hatch, you could do gyroid as well