AMS Lite Stand Spool Holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Reuse the Bambu AMS Lite Stand and External Spool Holder
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 27
- Makes
- 0
- Views
- 349
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is an adapter to allow you to attach your Bambu A1 Spool Holder to your AMS Lite Stand.
If you've top or wall mounted your AMS Lite, you probably have these two parts just laying around. This print allows you to repurpose them for when you need to print a non AMS compatible filament from an external spool.
Install:
You only need to use one of the two sets of holes for screws. (Either top or bottom). The wing that holds the spool can be installed facing either left or right.
You can reuse the original screws from the AMS Lite or I was able to use some M3x8 screws I had laying around, and self tap them into the holes.
Tested Print Settings (but I assume any reasonable settings would work):
eSun PLA+
0.2mm Layer Height
Gyroid Infill 10%
2 Wall Loops
Parts Used:
2x M3 Screws
A1 Spool Holder: https://us.store.bambulab.com/products/spool-holder-a1
AMS Lite Spool Holder: https://us.store.bambulab.com/products/ams-lite-stand