1 / 4
30 Degree Angled Bowden Retainer for Voron Printers
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Similar to the original Voron bowden retainer, but angled for top mounted spool holders
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 33
- Makes
- 0
- Views
- 158
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I needed the bowden retainer at an angle for my top mounted spool holder. Tolerances work for ASA and default Voron parts settings (4 perimeter, 40 % infill, 0.2 mm layer).
Use one M3x8 SHCS or BHCS screw and one M3 hammerhead nut (same as for the original part) for installation.
There are three files with different hole diameters for the PTFE tube (4.0 mm, 4.2 mm, 4.4 mm). The original Voron part uses 4.2 mm diameter and that also works for me, but if yours is too loose or too tight you have the option.