[OECC2] 25x15mm Cablechain System Print-in-Place with clips
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.43 – €0.52 net (excluding VAT)
For file: Dragchain_25x15 v2_0.4n_0.2mm_PLA_MK4S_25m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.47 excluding VAT (range midpoint).
- Weight reported by the author
- 7 g
- Print time reported by the author
- 25.2 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Cable chain system with 25x15mm internal cross-section. Cables and chain links can be inserted through a simple clip.
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 55
- Makes
- 0
- Views
- 206
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- GNU General Public License v3.0
Cable chain system with 25x15mm internal cross-section. Cables and chain links can be inserted through a simple clip.
Bend-angle on a single hinge: 45° upwards, 30° downwards. 40mm bend radius.
Your printer should be able to print 0.2mm clearances accurately to print in place, the parts can also be assembled afterward.