1 / 3
[OECC3] 50x30mm Cablechain System Print-in-Place with clips
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Cable chain system with 50x30mm internal cross-section. Cables and chain links can be inserted through a simple clip.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 43
- Makes
- 0
- Views
- 202
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- GNU General Public License v3.0
Cable chain system with 50x30mm internal cross-section. Cables and chain links can be inserted through a simple clip.
Bend-angle on a single hinge: 45° upwards, 30° downwards. 80mm bend radius.
Your printer should be able to print 0.2mm clearances accurately to print in place, the clips cannot be mounted after printing (in PLA at least).