1 / 1
Adafruit Mini PiTFT Riser
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
I found that the case I printed for the Adafruit Mini PiTFT with holes for the buttons wasn't quite lining up because the lid was allowing the TFT to tilt down slightly when the buttons were pressed. I made a quick riser to support the entire side of the TFT, with holes for the mounting bolts to pass through.