1 / 1
Perfume / cologne holder for closets .
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Its a holder for your Perfume that goes in your closet hanger bar .
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 9
- Makes
- 0
- Views
- 100
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bedroom
- License
- Creative Commons — Attribution — Noncommercial
Its really easy to print but u have to bare in mind that you only need supports for the bottom
and infill above 15% . Keep the speeds and temps low for better results .I used fuzzy skin for this but you can save time with it off .
PLA
Infill 20%
speed 100mm/s
bed temp 80C
hot end temp 225C
Supports touching buildplate only (mandatory)
full adhesion type brim
infill pattern triangles