Heart Cable Organizer
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Magnetic cable organizer for up to 3 cables, great for gifting it to your SO.
- Rating
- 0 / 5
- Likes
- 14
- Downloads
- 15
- Makes
- 0
- Views
- 116
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Share Alike
Description
This is a heart shaped magnetic cable organizer I made for my partner. It needs 4 magnets, 6 x 3 mm. It should fit any cable that is about 3.5 mm, so the standard ones using for charging phones or peripherals will fit. The model was designed in FreeCAD 1.0
I printed it with glitter PLA, with a 0.2 mm layer height. No supports or anything special needed. The model has a little chamfer for the flat side, to compensate elephant's foot.
Assembly instructions
Insert the 6 x 3 mm magnets into the holes. Those holes have a fillet around them to make the magnets easier to insert. The holes are 6.2 mm in diameter, so if your printer is well calibrated they will fit snug. If not, use a file to make the holes a bit bigger or scale the model a little bit :)
