1 / 3
Bottle handle
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Handle model for 5 and 6-liter bottles, reliability and convenience proven over years of use
- Rating
- 0 / 5
- Likes
- 18
- Downloads
- 86
- Makes
- 0
- Views
- 455
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Share Alike
I’m sharing a bottle handle model that I designed over four years ago and have been using ever since.
Files to Print:
- Handle: 1 pc.
- Hoop: 2 pcs. (Choose hoop_38.5mm for a 5L bottle or hoop_46mm for a 6L bottle.)
- Nut: 2 pcs.
Recommendations:
- Measure the bottle neck diameter first, then choose the appropriate hoop size.
- Use a brim when printing the hoops for better adhesion.
- Print 2 hoops and test the fit. If they fit well, proceed to print the other parts.
- Enable supports when printing the handle.
- If the nut is too loose, scale it down to approximately 98% or secure it using a small nail.