PTFE Connector Clip (PC4-M10)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Remix with different heights for ease of use.
- Rating
- 5 / 5
- Likes
- 11
- Downloads
- 74
- Makes
- 2
- Views
- 532
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
Remix for ease of use.
All Credits to the original author.
I print mine with the 0.6 version in PLA to keep the connectors on the Drybox and BMG straight. (The 1.0 is the original, totally unchanged, might as well take it)
Fits the BMG and its clones.
Print this if you swap filament, 10 pieces take like 10 Minutes and should empty out the old filament.
Print Settings:
Material: PLA, PETG
Layer height: 0.2 including first layer (!)
Infill: solid, enable thin walls and gap fill if its in your slicer
Support: none, brim not required because of the small height.
Use Hairspray if you have issues.