1 / 1
Ribbon Cable Frame Anchor - 2020 Extrusion
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This frame anchor will wrangle unwieldy Raspberry Pi display or camera ribbon cables. Simply insert and rotate 90 deg.
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 25
- Makes
- 0
- Views
- 127
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- GNU General Public License v3.0
Insert the anchor aligned with the extrusion, then rotate 90 degrees to lock. The loop is offset slightly to one side, so if it contacts something adjacent to the 2020 extrusion (like a panel), remove it, rotate it 180 degrees, then re-insert. Don't attempt to rotate then with a ribbon cable already passing through it; you'll risk damaging the ribbon cable!
Pair these with my ribbon cable angle cover to have your ribbon cable make a flat 90 degree turn.