Creality dual Z stepper alignment tools
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Clamp on rings using 3mm x 8mm long screws to give a homing reference to z motor position in case one side z is moved…
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 16
- Makes
- 0
- Views
- 112
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution
Clamp on rings using 3mm x 8mm long screws to give a homing reference to z motor position in case one side z is moved out of sync to the other. You set the z bed frames to same distance from top of frame down. Then auto home.The pointer is then aligned to reference line, so you have a way to see if it was moved while stepper motors were un powered.
Print Settings
Printer Brand:
Creality
Printer:
Ender 5
**Rafts:**
No
Supports:
No
**Resolution:**
.20
Infill:
15%
**Filament:** creality Pla YELLOW
Notes:
Use a lighter collor filament so you can use paint or black permanet marker to have pointer tip and reference groove stand out visually.
Category: 3D Printer Accessories