Foamie Tilt-Rotor Motor Mounts
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
These motor mounts allow you to convert a foamie RC plane to VTOL
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 59
- Makes
- 0
- Views
- 775
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial
These motor mounts allow you to turn a foam RC model into a tiltrotor.
The base model I started with is the FT Mellenium Flerken (I'd love to see these tried on other planes!)
You can print these parts with PLA and standard settings. If you're worried about hot motors you could print the motor mount in ABS.
Here's the parts list:
Base foam kit: https://store.flitetest.com/ft-millennium-flerken-mkr2/
MG9 Servos (qty 4): https://www.amazon.com/gp/product/B01JY3H4MA/
Flight Controller - F405 Wing or Wing Mini: https://www.amazon.com/Speedybee-Controller-Configuration-Solder-Free-Multilayer/dp/B0CVTSBND8/
2205 2300kv motors: https://www.amazon.com/gp/product/B088NGCZ64/
ESCs: https://www.amazon.com/gp/product/B0BJPS58GK/
5x4 Props: https://www.amazon.com/gp/product/B0BX9ZKD8M/
2200 mAh 3s LiPo battery: https://www.amazon.com/Zeee-Vehicles-Airplane-Quadcopter-Helicopter/dp/B0BYNSH6Q7/