Foamie Tilt-Rotor Motor Mounts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These motor mounts allow you to convert a foamie RC plane to VTOL
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 59
- Wydruki
- 0
- Wyświetlenia
- 775
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
These motor mounts allow you to turn a foam RC model into a tiltrotor.
The base model I started with is the FT Mellenium Flerken (I'd love to see these tried on other planes!)
You can print these parts with PLA and standard settings. If you're worried about hot motors you could print the motor mount in ABS.
Here's the parts list:
Base foam kit: https://store.flitetest.com/ft-millennium-flerken-mkr2/
MG9 Servos (qty 4): https://www.amazon.com/gp/product/B01JY3H4MA/
Flight Controller - F405 Wing or Wing Mini: https://www.amazon.com/Speedybee-Controller-Configuration-Solder-Free-Multilayer/dp/B0CVTSBND8/
2205 2300kv motors: https://www.amazon.com/gp/product/B088NGCZ64/
ESCs: https://www.amazon.com/gp/product/B0BJPS58GK/
5x4 Props: https://www.amazon.com/gp/product/B0BX9ZKD8M/
2200 mAh 3s LiPo battery: https://www.amazon.com/Zeee-Vehicles-Airplane-Quadcopter-Helicopter/dp/B0BYNSH6Q7/