Square Golf Launch Monitor Protector
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I designed this protector for the Square Golf Launch Monitor
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 150
- Makes
- 0
- Views
- 1,444
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Indoor Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I designed this protective housing for the Square Golf launch monitor. It accepts .093" Polycarbonate Lexan in the front. It is a very tight fit purposely. I included an STL file for the Lexan cutout template. Housing has ventilation holes in the back. Also, I included a separate block to be glued to the bottom (I tried making it part of the enclosure but it exceeded 220mm). With the block, you can raise the LM 1" off the turf.
I printed mine with PETG, 4 walls, 60% infill. I don't suggest PLA for this build. Ideally, I'd like to have done it with CF.
Also included in the files is an STL for a receiver for the enclosure. It's 1.75" tall and I made that to cut into my turf to place the monitor in the same spot every time for left and right handed sides of the hitting mat.