Cohesity Drive Caddy for 2.5 & 3.5 Hard Drives
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Allows you to insert 2.5" or 3.5" drives into the bays on 2000 series (maybe others) Cohesity rack mount servers.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 28
- Makes
- 0
- Views
- 540
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Share Alike
The instructions in the original are still generally applicable to this since not a lot has changed. There is a indent on the Cohesity drive holder that may require some tweaks when printing the 2.5" version.
Here are my relevant settings. I printed these in PLA and haven't had issues, but there are some suggestions on similar models (including the original) to use PETG if your drives get too warm:
Cohesity Caddy Front
- Probably want to open this as a project in Prusaslicer so that you get all the relevant settings. See screenshot:

- No supports
- No brim
- I add a box modifier in the middle between the two larger holes. This is set to 0 top and bottom layers to allow the infill to come through. You can also just generally set it to 0 top and bottom layers, but I liked the way this looked a bit more.
Cohesity 2.5 Caddy
- Supports everywhere
- No brim
- I added a support blocker for the indented area as the slicer will add them there. I haven't had any issues with no supports there, though you could try it with them. I imagine they may be a bit of a pain to remove though.
- Again likely just my printer, but I find it less likely that the 90 degree corners lift when I rotate the model about 30-45 degrees instead of the default centre of the bed.
Cohesity 3.5 Caddy
- Supports on build plate only
- No brim
- Again likely just my printer, but I find it less likely that the 90 degree corners lift when I rotate the model about 30-45 degrees instead of the default centre of the bed.
Hope this helps someone else that gets an older Cohesity server without any Drive Caddies!