Beer Tally, Bierzaehler, Beer Coaster
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
To keep track on the number of beers consumed, this coaster/counter may also serves as a gadget on say a boys night...
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 29
- Makes
- 0
- Views
- 230
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Enjoying a nice beer, keeping track on the number and bring some color to the table, this idea came to my mind.
Material used: PLA
Printer used: Prusa i3 MK3S, i3 MK3S+ and i3 MK4S
To achieve perfectly clear numbers the two-color printings ("Top" and “Ratchet Ring”) are printed with 0.15 or 0.1mm layers.
For infills, I used 30%. To obtain a solid “spring” and “Pin” a perimeter of 4 was selected.
Assembly steps are self-explanatory. Three M2x5mm Hex screws will hold the “Beer Tally” nicely together.
With the necessary caution the “Coaster” maybe glued together on the back side of the “Top” avoiding spills on the “Spring”, “Pin” and “Ratchet Ring”.
Three scratch protectors/bumpers with a 12mm (½") diameter have been applied to the “Base”.
Happy printing and enjoy a nice cool beer, or two… cheers…