Unbreakable Kenlin Rite Trak 1 Drawer Track Guide and Glide
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Remodeled from the ground up using someone else's STLs, made as chonky and strong as possible. Kenlin Rite Trak 1
- Rating
- 4.5 / 5
- Likes
- 9
- Downloads
- 165
- Makes
- 2
- Views
- 467
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Bedroom
- License
- Creative Commons — Attribution
Replaces and upgrades Kenlin Rite Trak 1 Drawer Track Guide and Glides
Fits manufactures such as Vaughan Bassett, Legacy, Pulaski, Lexington and others.
Made to be as strong as possible instead of as cheap as possible. These go on tight, you'll need to bump the drawer with your hip when putting the drawer in the first time. The slide action is also stiffer at first, wax helps lubricate without gathering dust.
Note that if you've broken your original ones, you may have bent the metal track on the bottom of the drawer. To fix that, gently hammer the metal rails back into place, as flat as you can.
Printed in generic PETG on a Qidi Plus 4.
The drawer side will need to be flipped 180, print with or without supports.
If printing with supports, I suggest tree supports with a 1mm xy separation on the first layer.