1 / 2
Nozzle Holder Prusa Enclosure
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This sits inside or outside the enclosure and is designed to hold 6 nozzles and the plastic storage boxes they came in.
- Rating
- 5 / 5
- Likes
- 5
- Downloads
- 24
- Makes
- 1
- Views
- 122
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
Print it however you want, but I used
- 3 perimiters
- PETg
- 15% infill
- 0.4 nozzle/ 0.2 layer height
Parts Required:
- 2 x M3x10
- 2x M3 hex nuts
The tolerance for the nuts is very tight. you may need to use a pliers to get the nut into the slot. Otherwise it's pretty obvious where this goes and what to do.
Here's a picture in case it's confusing.