SFF Dell Optiplex 5070 Motherboard Full Tower Adapter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A mount to adapt a motherboard from a Small Form Factor Dell Optiplex 5070 in a full sized PC tower.
- Rating
- 0 / 5
- Likes
- 33
- Downloads
- 197
- Makes
- 0
- Views
- 1,415
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution
Ever thought about mounting a Small Form Factor Dell Optiplex 5070 motherboard in a full-sized tower?
Do you dream of PCI slots not aligning correctly and needing custom adapters to make them fit?
Are you an electronics hoarder itching to build a DIY NAS with spare PC parts?
Do you have a friend who shamed you as you debated mounting one PC tower inside another PC tower?
And most importantly, do you own a printer that can handle 256mm?
If you answered yes to any of these, then this file might be exactly what you need!
Here’s the plan:
Grab some PETG, set your printer to 15% infill with 3 walls, 3 top shells, 3 bottom shells, and no support. Print it out, and you’ll be on your way to creating a janky, DIY NAS.
Notes:
- The top-left hole requires two motherboard standoffs.
- The rest need 3.5mm motherboard screws.
- I used this mount for the stock CPU cooler. It needed bigger holes for the screws, i just drilled them out with an 1/8" drill bit. : https://www.printables.com/model/853509-socket-115x-backplate-for-dell-cooler
Oh, and if you don’t already have all this stuff lying around, this project is a bad idea.
For your convenience (or ridicule), I’ve included an STL file, a STEP file, and even a Fusion 360 file—feel free to mock my questionable 3D design skills!
