1 / 13
Steven Mark TPU
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a 3d print design to build your TPU and also the instruction to do it. It is the STEAP version of it.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 24
- Makes
- 0
- Views
- 173
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
This is a 3d print design to build your TPU.
This is the STEAP version of it. Work in progress!
I made an ESP32 WROOM version to control the 3 frequencies.
To configure the TPU settings from the ESP32:
- Upload the firmware using ARDUINO IDE or other
- Connect it on USB-C
- Use your phone or desktop computer and connect to the Wi-Fi SSID: TPU…
- Password is TPU12345
- Once connected go into your browser to 192.168.4.1
- You can change a lot of thing from there including the SSID password to connect to the TPU
The STEAP is not an easy TPU to do but I will update the instruction over time.
Right now I put all my STL file to be able to make it and tool to help to wing the coil since it's not an easy task :).