MatterHackers Spool Adapter for RepWinder Spool System
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Parts needed in order to use MatterHackers Build Series Spools with the Repkord RepWinder System.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 33
- Makes
- 0
- Views
- 383
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
These are 2 3D printed parts needed in order to use MatterHackers Build Series Spools with the Repkord Repwinder System. I modified them off the original STLs posted by Repkord.
The spool connected to the winding core through the two holes on the spool (see pictures above). The hole on the back of the spool is visible, but you will need to poke through the sticker to find the hole on the front side (side with sticker) of the spool.
Overall I would highly recommend the Repwinder system. It makes loading and using your MMU2s much easier.
I hope you find this adapter helpful. Enjoy!