1 / 8
Clubhouse Piggy Bank — image 1
1 / 8

Clubhouse Piggy Bank

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Piggy bank inspired by mickey mouse clubhouse

Rating
0 / 5
Likes
11
Downloads
51
Makes
0
Views
293
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution

Design Notes

The connectors are designed as M12x1.75 threaded bolts. Depending on printer quality using a bolt and nut to prep the threads is recommended. 

Print recommendations

All objects are designed to be printed with a flat side down on the build plate.

Print threaded inserts with 0.16mm or smaller resolution.

Print all objects with a max of 0.2mm layer height.

Recommend printing the windows with lowest available layer height for nicest fit.

Print the door window frame, door knob, and door frame with the lowest available layer height so that the printer slows down and so that the door window frame bars print. 

For the door window frame print “thin lines” and lowest layer height available.

Glue is required to attached the small detail pieces and attached the slide pieces together. 

Note

I was unable to get the window frames to separate from supports when printing, and I settled on the MMU model. Otherwise the entire design should be able to be printed with a single extruded/color printer. I was also unable to get a successful design or print for a single piece slide.

 

Part Counts

Black

7x M12x1.75 x 28mm thread

1x Lower Head

1x Upper Head

2x Lower Ear

2x Upper Ear

1x Leg

1x Neck

2x Window Frame (Or print MMU Windows)

1x door knob

 

Red

1x House

 

Yellow

1x Shoe

 

Light Blue

2x Windows [pair] (Or print MMU Windows)

1x Door Window

 

Grey

1x Door window frame

 

White

1x Door Frame

 

Dark Blue (SLIDE)

1x Slide House Connector

1x Slide End

2x Slide 45 degree

3x Slide 60 degree

5x Slide Plug

 

 

Design is in no way affiliated with or endorsed by Disney.

Tags